Philips Saeco GranBaristo Скачать руководство пользователя страница 74

Страница: 74 / 83

GRAN BARISTO 07 DISASSEMBLY

8/10

The following are located inside the compartment

protected by the casing:

- Electric motor (A) with gears (B) and (C) for trans

mission and timing of the dispenser.

- Microswitch (D) detecting brewing unit home and

work positions.

- Remove the gear (C) that meshes with the motor

transmission shaft.

- Remove the large gear (B).

- Remove the motor (A), complete with transmission

shaft.

- Gear box encoder board (E)

Drip tray sensor reed (F)

Replace the gear (B), making sure that the

imprint of the arrows are aligned.

When replacing the motor and the transmission

shaft, make sure the guide runners (L) are in the

right position.

Grease the shaft thoroughly and evenly.

Microswitch present brew unit.

Loosen the screws highlighted and

remove the gearmotor assembly.

Loosen the screws highlighted

and remove the gearmotor cover.

Lift the assembly and in the back there is the microswitch.

Содержание Saeco GranBaristo




















































































Результаты поиска

Содержание Saeco GranBaristo

Отзывы:

Похожие инструкции для Saeco GranBaristo

Бренды по названию

Популярные бренды

Philips Saeco GranBaristo, Руководство по обслуживанию

Результаты поиска

Содержание Saeco GranBaristo

Отзывы:

Похожие инструкции для Saeco GranBaristo

Бренды по названию

Популярные бренды