Problem
Possible cause
Solution
The cleaning fl uid level is too low. If the
fl uid volume in the cleaning chamber
drops below the minimum level during the
cleaning program, the program aborts.The
cleaning light and the ‘cleaning chamber
empty’ symbol fl ash at intervals and the
holder returns to its starting position.
Refi ll the cleaning chamber with
cleaning fl uid to a level between the
two lines (see chapter ‘Cleaning and
maintenance’).
You have used another cleaning fl uid than
the original Philips cleaning fl uid.
Only use HQ200 Philips Cleaning
Fluid.
The Jet Clean
System does not
work when I press
the on/off button.
The Jet Clean System is not connected to
the mains.
Put the small plug in the Jet Clean
System and put the adapter in the
wall socket.
You have not placed the shaver in the
Jet Clean System properly, so there is no
electrical connection between the Jet Clean
System and the shaver.
Press the shaver tightly into the
holder to lock it into place.
The shaver is not
fully charged after
I charge it in the
charger/Jet Clean
System.
You have not placed the shaver in the
charger/Jet Clean System properly.
Make sure you press the shaver
until it locks into place.
English
