We advise you to shave regularly (at least 3 times a week) for a period of
3 weeks to allow your skin to adapt to the new shaver. During this period,
use your new electric shaver exclusively and do not use other shaving
methods. If you use different shaving methods, it is more diffi cult for your
skin to adapt to the new shaving system.
1
Press the on/off button once to switch on the shaver.
The display lights up for a few seconds.
,
2
Move the shaving heads over your skin in circular movements.
Do not make straight movements.
-
3
Press the on/off button once to switch off the shaver.
The display lights up for a few seconds and then shows the remaining
,
battery capacity.
Wet shaving
You can also use this shaver on a wet face with shaving foam or shaving gel.
To shave with shaving foam or shaving gel, follow the steps below:
1
Apply some water to your skin.
2
Apply shaving foam or shaving gel to your skin.
3
Rinse the shaving unit under the tap to ensure that the shaving unit
glides smoothly over your skin.
4
Press the on/off button once to switch on the shaver.
5
Move the shaving heads over your skin in circular movements.
Note: Rinse the shaver under the tap regularly to ensure that it continues to
glide smoothly over your skin.
6
Dry your face and thoroughly clean the shaver after use (see chapter
‘Cleaning and maintenance’).
Note: Make sure you rinse all foam or shaving gel off the shaver.
Trimming
You can use the trimmer to groom your sideburns and moustache.
1
Pull the shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off the shaver.
2
Press the on/off button once to switch on the shaver.
The display lights up for a few seconds.
,
3
Slide the trimmer slide forwards to slide out the trimmer.
4
You can now start trimming.
5
Slide the trimmer slide backwards to retract the trimmer.
6
Press the on/off button once to switch off the shaver.
The display lights up for a few seconds and shows the remaining
,
battery capacity.
7
Insert the lug of the shaving unit into the slot in the top of the shaver
(1). Then press down the shaving unit (2) to attach it to the shaver
(‘click’).
Using the Beard styler attachment (RQ1275cc, RQ1275 only)
1
Make sure the shaver is switched off.
2
Pull the shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off the shaver.
3
Insert the lug of the Beard Styler attachment into the slot in the top
of the shaver (1). Then press down the beard styler attachment (2)
to attach it to the shaver (‘click’).
Using the Beard styler attachment with comb
You can use the Beard Styler attachment with the comb attached to style
your beard at one fi xed setting, but also at different length settings. The
hair length settings on the Beard Styler attachment correspond to the
remaining hair length after cutting and range from 1 to 5mm.
1
Slide the comb straight into the guiding grooves on both sides of the
beard styler attachment (‘click’).
2
1
English
English
