•
If you succeed in utilizing the above commands, you will receive a
continuous connection. Stop the process by pressing <Ctrl>+<C> keys.
•
If the statistic shows ‘100% loss’, you should check that the network line
and connection status are stable; the IP address which is assigned to
NetCam2; and whether a PC has the same local IP address as the NetCam2.
(Same local IP address of C grade network means that the first 3 numbers
are same but the fourth is different. For example 203.243.232.111 and
203.243.232.112 are the same local network IP addresses).
MAC address
The 12 digit MAC address of the NetCam is on a label on the bottom. For
correct entering of this address using the ARP command, enter the “-” as
separator to form a string of 6 two digit characters, i.e. 00408C100086 becomes
00-40-8C-10-00-86.
16
NetCam2
Section 2
NetCam2 _ii_00592en.qxd 1/23/03 2:22 PM Page 16
