Philips L05HD, Руководство по обучению

Страница: 15 / 32

Set Control (Figure 7)
The L05HD has two microprocessors, The Hercules located on the Family board and the TV
Controller located on the Trident board.
The Hercules, 7200, provides control for the entire set. During standby, the Hercules and the
Remote sensor are powered by the 3.3 volt supply. The customer communicates with the
Hercules via the Remote sensor and Power switch located on the Front Control panel. The
power supplies are switched On via the STBY-CONT and B lines. The TV Controller is reset
by the C control line. The I2C bus communicates with the EEPROM 7601, Tuner 1000, TV
Controller 7206, Trident 7201, A/D 7210, TV Display Processor, 7221, and HDMI panel.
Page 13
HERCULES PROCESSOR