Philips hue, Руководство пользователя

Страница: 23 / 30

Project Manager:
Trident Artist:
PHILIPS
HUE Accessories
Philips Hue wall switch module
N/A
Trident UK
322263907501
A4
Arno van den Biggelaar
ARTWORK
PHL462553
Trident UK, Connaught House, Connaught Road,
Kingswood Business Park, Hull, HU7 3AP, England.
T:+44 (0) 01482 828100
Please note that any low resolution paper Canon colour
copies associated with this job should be referred to for
content, layout and colour separation only.
UNDER NO CIRCUMSTANCES SHOULD THIS
ARTWORK BE ALTERED WITHOUT PRIOR
PERMISSION FROM TRIDENT.
Dieline Guides
Technical & Non Printing Items
TR2132077
26/03/2021
C
Oli Hayton
Colours:
Master Ref:
TR Ref:
Brand:
Brand execution:
Product name:
Shape:
Wattage:
Region:
Artwork 12NC:
Die cut 12NC:
Barcode:
CRC Number:
Action:
Date:
1
Process cyan
LTH
2
Process magenta
LTH
3
Process yellow
LTH
4
Process black
LTH
Three way
switching*
Commutation
bidirectionnelle*
Conmutación
bidireccional*
Ground,
keep
connected
Replace HOT
with orange
cable and slide fork
connector between
screw and housing.
Tighten the screw.
Replace HOT
with orange
cable and slide fork
connector between
screw and housing.
Tighten the screw.
Don’t use HOT
position, original
wire is added to
wire nut
Replace
DARK/COMMON
with yellow cable
and slide fork
connector between
screw and housing.
Tighten the screw.
Replace HOT
with yellow
cable and slide fork
connector between
screw and housing.
Tighten the screw.
Ground,
keep
connected
Single pole 3-way
Single pole 2 Single pole light switches
in 1 installation box
3-way
Toggle and paddle switch variants
• A toggle or paddle light switch typically has two positions, On and Off.
• We support 2 switches per wall switch module.
• There are many of variances of light switches.
• We don’t recommend to use the module with switches that combine power outlets and
light switches.
• The module doesn’t work in combination with dimmers and dimming modules or
backstab light switches without terminal screws.
• Attention! Please note that by using the wall switch module any on/off markings on the
light switch might not longer follow the state of the lights.
• Find below commonly found switches and where to connect the provided orange and
yellow cables.
• When in doubt if your switch is suitable for installation, contact an electrician for
support.
• Dismount the existing original wires and replace with provided wires when screw
terminals are used. (When push-in wires are used, dissemble these wires and use screw
terminals for the provided wires)
23