Project Manager:
Trident Artist:
PHILIPS
HUE Accessories
Philips Hue wall switch module
N/A
Trident UK
322263907501
A4
Arno van den Biggelaar
ARTWORK
PHL462553
Trident UK, Connaught House, Connaught Road,
Kingswood Business Park, Hull, HU7 3AP, England.
T:+44 (0) 01482 828100
Please note that any low resolution paper Canon colour
copies associated with this job should be referred to for
content, layout and colour separation only.
UNDER NO CIRCUMSTANCES SHOULD THIS
ARTWORK BE ALTERED WITHOUT PRIOR
PERMISSION FROM TRIDENT.
Dieline
Guides
Technical & Non Printing Items
TR2132077
26/03/2021
C
Oli Hayton
Colours:
Master Ref:
TR Ref:
Brand:
Brand execution:
Product name:
Shape:
Wattage:
Region:
Artwork 12NC:
Die cut 12NC:
Barcode:
CRC Number:
Action:
Date:
1
Process cyan
LTH
2
Process magenta
LTH
3
Process yellow
LTH
4
Process black
LTH
Toggle/paddle switch
Single pole
1. Turn-off circuit breaker
2. Dismount light switch
6. Connect the provided orange and
yellow wire to the module and light
switch using the screw terminals for
the fork connectors
Don’t extend the provided wires
3. Remove original (HOT) wires but
keep ground connected
Tip! Take a photo of the position
of the wiring
7. Place the module into the
installation box
4. Place original (HOT) wires into the
wire nut. Never add a neutral
(white wire) to the wire nut.
5. Push the wire nut and cables in the
installation box
8. Put back the light switch
9. Turn on the circuit breaker
10.Open the Hue app and select
settings -> accessory configuration
to add the module
1
2
!
Keep ground
wire connected
Gardez le fil de
terre connecté
Mantener
conectado el
cable de tierra
1
2
1 2
1
1
2
21
