Project Manager:
Trident Artist:
PHILIPS
HUE Accessories
Philips Hue wall switch module
N/A
Trident UK
322263907501
A4
Arno van den Biggelaar
ARTWORK
PHL462553
Trident UK, Connaught House, Connaught Road,
Kingswood Business Park, Hull, HU7 3AP, England.
T:+44 (0) 01482 828100
Please note that any low resolution paper Canon colour
copies associated with this job should be referred to for
content, layout and colour separation only.
UNDER NO CIRCUMSTANCES SHOULD THIS
ARTWORK BE ALTERED WITHOUT PRIOR
PERMISSION FROM TRIDENT.
Dieline
Guides
Technical & Non Printing Items
TR2132077
26/03/2021
C
Oli Hayton
Colours:
Master Ref:
TR Ref:
Brand:
Brand execution:
Product name:
Shape:
Wattage:
Region:
Artwork 12NC:
Die cut 12NC:
Barcode:
CRC Number:
Action:
Date:
1
Process cyan
LTH
2
Process magenta
LTH
3
Process yellow
LTH
4
Process black
LTH
1 2
1
2
image 2
image 1
Toggle and paddle switch
2 single pole inputs
• Switching 2 single pole inputs is the second default for the Hue wall switch module in
the Hue app.
• This installation is for a two switch, in one installation box, controlling two light points or
circuits.
• For circuit diagrams please review the application notes on our FAQ page.
1. In this situation the 4 hot wires need to be placed into a wire nut(s). The supplied wire
nut can contain 3 wires max. Never add neutral and or ground to wire-nut
2. You need to use two sets of the provided wiring, one in position 1 and one in
position 2 in the module. (see image 1)
3. Place the provided fork connectors in the same position where you removed the original
HOT wires from the light switch. Orange will go on the top of your switch and yellow on
the bottom (When push-in wires are used instead of screw terminals, dissemble these
HOT wires from the switch and use screw terminals for the provided wires)
• When adding the product to your accessories in the Hue app, select double rocker for
this installation (see image 2)
24
