EN 10
3139 785 32540
2.
Measurements Setup, Service Aid & Lead Free Requirements
2.2.2 Service Hints for Power Box Cable Dressing
The following procedures should be followed for Power Box Module
assembly after being repaired.
1) For the 5 and 12 poles cables to Audio BD, paste a tape
over them, ensuring it is
fi
rmly secured to the metal
chassis.
Figure 2-1
2) For the 8 pole cable between the PSU and TI ampli
fi
er,
fold the cable as indicated, making it as close possible to
metal chassis.
Figure 2-2
3) Fold as indicated underneath the metal chassis for both
point 1) and 2). Note that the cables underneath should
be laid as close possible to the metal chassis also.
Figure 2-3
4) For the FFC cable between Audio BD and TI ampli
fi
er,
fold as indicated, making it sure that the cable should be
outside of both boards.
Figure 2-4
