Philips GoGEAR SA4TP404, Руководство пользователя

Страница: 11 / 40

9 EN
3 Get started
Charge power
TAP4.3 has a built-in battery that can be
charged through the USB connector of a
computer.
Connect
TAP4.3 to a PC by using the USB
cable.
Note
*
When you connect TAP4.3 to a computer, you are
$}~ [Charge & transfer] or
[Charge & play] . If no option is selected, [Charge &
transfer] applies.
*
To play the TAP4.3 when you charge power, select
[Charge & play] .
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
»
€}"$
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
*
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
*
The charging animation stops and the icon is
displayed when the charging process is completed.
To conserve battery power and increase the
play time, do the following on TAP4.3:
* Set the backlight timer to a low value
(go to > [Display settings] >
[Screen off timer] ).
Charge through a USB AC/DC
adapter
To charge TAP4.3 through a USB AC/DC
adapter, use Philips AY5800 (Input: 100 - 240 V,
~50/60 Hz, 0.15 A; Output: 5.0 V, 0.5A).
Switch the player on or off
Press and hold until the player is switched on
or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
If in idle mode (no play, no button is pressed)
for a certain time duration, the player switches
off automatically.
"
* From the Home screen, go to >
[Set power-saving mode…] .