1.0 TECHNICAL SPECIFICATION and SERVICE HINTS
For HDD086/HDD085/HDD082 (MTP mode device)
1. Unzip
the
Factory.rar
file to your PC. You
should find three folder name “
Bootloader
”,
“
DM
” & “
Drive_I
”.
2. Unzip
the
Setting.rar
file and choose the right
deviceinfo.sec
file according to the device
model. Then copy this file into
\
Drive_I\UnzipToRoot
folder to rewrite the
original
deviceinfo.sec
file.
3. Connect the DFU USB cable to the device first
and then connect to your PC.
4. Launch the DFU program.
5. Observe the dialogue box to ensure
“DEVICE
IS IN DFU MODE”
.
6. Select
Download
and then click
Browse
to get
bootLoader_HDDXXX.ebn
file from
Bootloader
folder.
7. Click
Start Download
to download the firmware
to the device. The program will stop once the
successful message is display.
8. Disconnect DFU USB cable from the device.
9. Open the device, displace will show “
BOOT
LOADER APPLICATION Version 4.0
”.
10. Connect the device with your PC by normal
USB cable.
11. Run the
install_HDD08x.bat
file from
Drive_I
folder.
12. Follow all screen instructions to complete the
installation.
13. Safely remove the device from PC by clicking
on the
icon in your task tray bar. Once the
device is disconnected from the PC, the display
will show “Firmware Upgrade” for a couple of
