6.0 FACTORY SERVICE MODE TESTING
Programming the device using for stand-alone FSM
The following is the description for programming the device in stand-alone
mode.
1. Press & hold “ Rec” and then Press
together
2. The FSM/DVT application will start and you will see the following
screen.
3. Navigate to the required test.
Using the FSM integrated with UI
Press UP/DOWN key to browse through available tests. Please note that
this action does not activate the test. Press RIGHT key to activate the test
[which is displayed on the screen]. Within a given test LEFT key always
exits from the test back to the test browse screen [Exceptions are Keypad
test, Remote Keypad Test, where test can be exited by 2 short left key
presses].
The following diagram describes the test flow.
Device Keypad
Test
LCD and Back
Light Test
SDRAM Read/
Write Test
SDRAM Self
Refresh Test
HDD Test
Audio Test
FM Tuner Test
Battery Level
test
Battery
Charging
MIC Recording
RTC Test
EEPROM Test
Perform Audio Test
Perform HDD Test
LEFT
Perform FM Tuner
Test
Perform SDRM Self
refresh Test
Perform SDRAM
R/W Test
Perform Battery
Level Test
Perform Battery
Charging Test
Perform MIC
RecordingTest
Perform RTC Test
Perform
EEPROMTest
Perform Device
KeyPad Test
Perform LCD and
Back Light Test
Perform 5-Key
Remote Test
UP
DOWN
LEFT
LEFT
LEFT
LEFT
LEFT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
RIGHT
UP
UP
UP
UP
UP
UP
UP
UP
UP
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
1
7
10
6
5
4
3
2
8
9
11
12
13
UP
LEFT short
press (2 Times)
Device Key Test
LCD Backlight Test
5-key Remote Key
Test
SDRAM Read/Write Test
SDRAM Self-refresh Test
HDD Test
Audio Test
FM Tuner Test
Battery Level Test
Battery Charging Test
MIC Recording Test
Real Time Clock Test
. EEPROM Test
UP
LEFT
LEFT
LEFT
LEFT
5-Key Remote
Test
LEFT
<HDD 084>
<FSM/DVT X.X>
<Week XXX>
