English
EN
17
Cont
e
n
ts
Mount Flavors frames
A
B
A
Decorative frames
B
Finger slot
Note
To avoid damage to the unit, ensure that it is
placed on a stable surface before you carry out the
following actions.
•
1
Place the main unit and speakers with the
front panel facing up on a
fl
at surface.
2
Align the frames with the front of the unit/
speakers.
3
Mount the frames.
To remove frame from the main unit,
pull off the frame using the
fi
nger slot.
•
Attach table stand to the
main unit
1
Ensure all the required cables are
connected to this unit.
2
Place the main unit with the front panel
facing down on a
fl
at surface.
3
Attach the table stand to the rear of this
unit and slide it to the left to lock into
position.
To remove the table stand, hold the
bottom of the stand and slide it to the
right.
C
C
table stand
Note
Do not attach the table stand if you want to mount
this unit on the wall.
•
•
1_fts6000_12_eng3_final.indd 17
1_fts6000_12_eng3_final.indd 17
2008-09-03 11:55:03 AM
2008-09-03 11:55:03 AM
