Philips EasyKey 7100DS, Руководство пользователя

Страница: 13 / 14

22 23
Alarm types and alarm modes
Triggering:
Inserted with mechanical key to
unlock.
Alarm method:
Continuous repeated alarm.
Turning off:
The alarm will be automatically
turned off or encripted key verification
succefully.
8 Troubleshooting
Anti-dismantling alarm
How to Trigger
：
cables from the inner body and
outer body are disconnected.
Alarm method: Continuous repeated larms.
Turning off: cutting off the power supply.
How to replace batteries
When the battery voltage is insufficient,
and the door cannot be opened from
the outside, you can power up the lock
through the Micro USB interface by using
a 5V power bank as an emergency power
supply. After opening the door, please
replace the batteries immediately.
Low battery alarm reminds you to replace the batteries.
Triggering: After waking up, the system will
run an automatic examination on the battery
voltage.If the voltage is too low, there will be
a voice prompt of “Low battery. Please replace
all batteries”.
Alarm method: A voice prompt of “Low battery.
Please replace all batteries” during unlocking.
Turning off: The alarm will be automatically
turned off.
Mechanical Key Using Alarm
How to apply an emergency power
Emergency power interface
The lock is powered by 4pcs 1.5V Alkaline
batteries. There are two sets of working
power inside the battery cover. 8 batteries
can be put in to extend the battery
life and reduce battery replacement
frequency. The battery box is located
at the upper end of the inner body.By
pushing the button on the top of the inner
body, you can take out the battery cover
and remove the batteries.