E
n
g
li
sh
79
System Menu Options
(continued)
System Menu Options
(continued)
System Menu Options
(continued)
Analogue Channel settings - Manual Search
In some cases, not all of the available TV channels may have been found
and stored during basic installation. In this case, you will need to search
for and store the missing or coded TV channels manually.
A
Press
SYSTEM
on the remote control. Select {
Setup
} in the menu
and press
repeatedly to select {
Analogue Ch.
}.
B
Press
repeatedly to select the following settings in the menu and
press
to enter its options.
Entry Mode
Select manual search based on channel allocation or frequency entry
{
Channel
,
S. Channel
(Special channel),
MHz
(frequency) }.
Note:
S. Channel refers to specified hyperband channels.
Entry
– Use the
alphanumeric keypad 0-9
to enter the frequency/channel
number, press
OK
and the
Green
button for {
STORE
}.
OR
– Press the
Blue
button on the remote control for {
SEARCH
}, once
you have found the correct frequency/channel, press the
Green
button for {
STORE
}.
Preset
Use the
alphanumeric keypad 0-9
to enter the preset channel number
for the channel to store (e.g., ‘01’), press
OK
and the
Green
button for
{
STORE
}.
Preset name
Use the
alphanumeric keypad 0-9
to enter the preset channel name,
press
OK
and the
Green
button for {
STORE
}.
Maximum four characters for preset channel name.
Decorder
If the current TV channel is transmitted by coded TV signals that can only
be viewed properly with a decoder which is connected to the
EXT2 AUX-I/O socket, you need to activate the connected decoder.
{
On
}
– Select this to allocate the connected decoder to this
TV channel.
{
Off
}
– Turns off the decoder feature.
TV system
Set the TV system that produces the least distortion of picture and sound.
See pages 178~179 “TV System Guide” for more information.
NICAM
NICAM is a digital sound transmission system. It can transmit either one
stereo channel or two separate mono channels.
{
On
}
– Improves the sound transmission of the TV channel.
{
Off
}
– Select this if the reception is poor and the sound is
distorted.
Fine tuning
Select this to fine-tune the TV channel manually if the reception is poor.
Use
keys to adjust the frequency and press
OK
to confirm.
Entry mode
Analogue Ch.
Setup
MHz
Entry
Preset
Preset name
Decoder
Analogue Ch.
Setup
Off On
TV system
Nicam
Fine t une
167.5 MHz
P 04
RTL4
SEARCH
STORE
SEARCH
STORE
PAL-BG
Off On
Entry mode
Analogue Ch.
Setup
MHz
Entry
Preset
Preset name
Decoder
Analogue Ch.
Setup
Off On
TV system
Nicam
Fine t une
167.5 MHz
P 04
RTL4
SEARCH
STORE
SEARCH
STORE
PAL-BG
Off On
dvdr5350H_EU_Eng537.indd 79
2005-09-16 2:28:05 PM
