E
n
g
li
sh
25
Step 3: Installation and Set-up
(continued)
E
The Channel Search menu appears on
then TV. Select {
Channel Search
} in
the menu and press
OK
on the remote
control to start
It takes a few minutes to complete.
CHANNEL SEARCH
Automatic Channel search will find and store all channels.
Make sure to connect the antenna.
Channel Search
Skip Search
Start
OK
Note:
Make sure you have successfully
made all the required connections to this
recorder, the TV and Satellite Receiver/
Cable Box (if any) and turned them on.
The channel search will detect the signals
and save all the available programme
channels.
If no channels are found :
– Try the auto TV channel installation
after completing the basic setup, see page
78.
F
After the channel search is finished, the
total number of found and stored
channels appears, press
OK
to continue.
CHANNEL SEARCH
Restart Search
Continue
OK
Analogue TV channels found: 9
G
The time and date menu appears.
TIME AND DATE
Please check the Time and If incorrect, navigate
right to correct the Time.
Time
Date
Done
20:01
31-01-2005
OK
i. If the information is correct, select
{
Done
} in the menu and press
OK
.
ii. If changes are required, use the
alphanumeric keypad 0-9
to enter
the correct time and date in the
respective field.
H
The basic installation is now completed.
Easy setup completed. Continue with GUIDE Plus+
installation?
Continue
Install later
OK
OK
i. Select {
Continue
} in the menu and
press
OK
to start the GUIDE Plus+
installation. See next page for the
complete detailed setup.
ii. Select {
Install later
} in the menu
to skip the GUIDE Plus+ installation.
The next time when you want to
install the GUIDE Plus+ system, press
GUIDE
on the remote control, see
next page.
I
Wait until the recorder has finished
initialising the system, then press
OK
to
exit.
You may now enjoy using this
recorder.
Helpful Hint:
– The TV programme listings do not appear
on the GUIDE Plus+ system as soon as you
complete the basic installation. It may take
up to 24 hours to receive TV listings data.
TIPS:
After completing the basic installation, you can change or update your settings using the system
setup menu, see page 75~80.
dvdr5350H_EU_Eng537.indd 25
2005-09-16 2:25:42 PM
