5 Connection and Installation
5.1 Connections
5.1.1 Connect the receiver to your TV and VCR
Incorporate the receiver in your existing installation as shown below / decoder receiver.
1
Plug your aerial lead plug into the "AERIAL IN" socket of your digital receiver.
2
Connect the "RF OUT" socket of your digital receiver to the "Aerial input" socket of your VCR by means of the RF coaxial
lead supplied with your digital receiver.
3
Connect the "RF OUT" socket of your VCR to the "Aerial input" socket of your TV set by means of a RF coaxial lead.
4
Connect the "TV" SCART socket of your digital receiver to the RGB capable SCART socket of your TV set by means of the
SCART lead supplied with your digital receiver.
5
Connect the "VCR" SCART socket of your digital receiver to the "EXT1" SCART socket of your VCR (so called OUT) by
means of a SCART lead.
6
Plug all your equipment, excluding your digital receiver, into the mains.
7
Go to chapter 5.2 to proceed with the channel scan of your digital receiver.
Notes:
1 This connection also applies if your VCR has two SCART sockets.
2 With this connection set up you can:
- Watch digital TV while you record analogue TV.
- Watch analogue TV while you record digital TV.
- Record the digital TV channel you are watching.
- Watch Play Back from your VCR.
8
CONNECTION AND INSTALLATION
English
