6 Day to Day operation
6.1 Switch your receiver
When you connect your receiver to mains the receiver front panel
display gets on, after a few seconds the Welcome screen is shortly shown
then after few tenth of seconds the receiver is either in standby or in
viewing mode.
Note: During power up after connection to mains, it is normal for the front
display to turn off for few seconds. It shall turn on later on by showing MHP.
6.2 Wake up or Switch your receiver to
standby
●
You watch TV or listen to radio, press the standby button to switch your
receiver to standby.
●
Your receiver is in standby, to wake it up:
- Either press the
P+
or the
P-
button.
- Or press one digit button.
6.3 Select TV or Radio mode
Your receiver may work in two modes:
TV
or
radio
. To switch between
these two modes, press the
RADIO
key. If you are watching one of the
TV channels, pressing
RADIO
tunes to the last tuned radio channel
belonging to the previously selected channel list. Pressing
RADIO
again
returns to the TV mode - to the last tuned TV channel.
On switching the mode, the
Channel Banner
appears for its timeout. In
the radio mode, the radio label appears/disappears at random positions
on the screen to avoid damaging your TV screen.
Radio Label
6.4 How to switch between channel in the
list
Your receiver gives you access to TV Channel List and to Radio Channel
List.
To display the currently selected channel list, press the
FAV
key. To
change the channel list press
C
or
B
keys. Then select the channel by
pressing
V
or
W
, or number keys. Each time you highlight a non-
current channel, the
[OK]
icon appears in the
Channel Banner
. To
tune to this channel, press
OK
.
Note: Channels lists allow you to work in so-called browsing mode. In this mode,
the box remains tuned to the same channel, while you browse through channels
and programs.
TV Channel List
10
DAY TO DAY OPERATION
English
