Philips DTR6600 Скачать руководство пользователя страница 22

Страница: 22 / 42

8.4.2.1 Installation / Settings / TV Settings

The

TV Settings

screen contains two options:

TV Screen Format

and

Display Format

. Change the

TV Screen Format

setting, if necessary.

You may also change the default

Display Format

value (Letter-box) to

change the way the video is transformed if the broadcast aspect ratio is

different than the aspect ratio of your TV. Read the descriptions that

appear in the

TV Settings

screen before you make a decision.

TV Settings Screen

8.4.2.2 Installation / Settings / System Settings

The

System Settings

screen contains some of the configuration

parameters you may change.

Video Standard

This option is preconfigured depending on the

Country

selection. There

are two possible standards: PAL and SECAM.

TV SCART Output, VCR SCART Output

Select the appropriate format of the output signals.

Note: to get the best picture quality and sharpness set the "TV SCART output"

option to "RGB".

Dolby Digital

If you use the

Dolby Digital

receiver, change the value of the

Dolby

Digital

option to

Yes

System Settings Screen

Note: If you set this option to Yes, when the broadcast carries Dolby Digital:

- No audio will be available at receiver's TV & VCR SCARTs as well as L/R audio

outputs. Only Dolby Digital bit stream (AC3 - 5.1) will be available at Digital

Optical Out.

- During a timer, the receiver will automatically switch back to PCM (2 channel

in digital) and audio will be available at receiver's TV & VCR SCARTs as well as

L/R audio outputs to allow recording of audio.

You will find detailed info concerning: the

Easy Recording

Recording

Type

and

Device

settings in the

Advanced Settings

section later in this

manual (see chapter 9).

8.4.2.3 Installation / Settings / Modem Settings

Your receiver is equipped with an internal modem. To configure your

modem parameters use the remote control keys presented in the help

bar. Pressing

RED

allows you to enter a virtual keyboard where you will

be able to find any characters you need. Once you have configured your

modem, press

to confirm its configuration.

Modem Settings Screen

Virtual Keyboard

CHANGE THE SETTING OF YOUR RECEIVER

English

Содержание DTR6600











































Результаты поиска

Содержание DTR6600

Отзывы:

Бренды по названию

Популярные бренды

Philips DTR6600, Руководство пользователя

Результаты поиска

Содержание DTR6600

Отзывы:

Бренды по названию

Популярные бренды