6
PREPARING SETTING USING REMOTE CONTROL
4.1 Installation of batteries
●
Remove the remote control back cover.
●
Insert the two batteries (type R06 / AA 1.5 V)
supplied.
●
Position them as shown in the diagram in the battery
compartment.
●
Replace the cover.
The Philips batteries supplied with your receiver's
remote control do not contain heavy metals such as
Mercury or Nickel Cadmium. Nevertheless in many
countries exhausted batteries may not be disposed of
with your household waste. Please ensure you dispose of
exhausted batteries according to local regulations.
4.2 Setting of your remote
control
4.2.1 Mode setting
Your 5 in 1 Remote control allows the control of most of
your Audio / Video equipment through various modes,
which are: Terrestrial receiver mode so called STB (Set
Top Box), TV, VCR, DVD and Amplifier-Tuner.
Pressing the MODE button once will remind you the
mode you are in through blinking lights: left for STB,
middle for TV, right for VCR, left-middle for DVD and
middle-right for Amplifier-Tuner.
To set a given mode press the MODE button several
times until the desired mode is signalled by the light(s).
The setting sequence is STB
➔
TV
➔
VCR
➔
DVD
➔
Amplifier-Tuner.
4.2.2 Volume and mute control setting
When the remote control is set to STB mode the Volume
+ / Volume - / Mute buttons can either control the
corresponding functions of your TV sets or the
corresponding function of your digital receiver. Refer to
chapters 4.2.2.1 or 4.2.2.2.
Note: we recommend Volume and mute control via your digital
receiver. Refer to chapter 4.2.2.1 for setting.
4.2.2.1 You want the remote to control the volume
and mute via your digital receiver (recom-
manded).
To set the volume/mute control to STB
1
Select the STB mode
2
Press simultaneously 1 and 9 buttons until the LED
blinks twice then release the buttons.
3
Enter code 993, the LED is blinking once after each digit
entry.
4
Press the "green" button, the LED shall blink twice to
acknowledge the new setting.
4.2.2.2 You want the remote to control the volume
and mute of your TV set / Set volume
control to TV.
The factory setting of your remote is set to allow the
control of the volume / mute of a Philips TV set. If your
TV set has a different brand check in the TV brand list
what code(s) might apply then change the setting of your
remote control according to the method described in
chapter 11.1.
Note: to set or reset the volume/mute control to TV follow
procedure below:
1 Select the STB mode.
2 Press simultaneously 1 and 9 buttons until the LED blinks
twice then release the buttons.
3 Enter code 993, the LED is blinking once after each entry.
4 Press the "yellow" button, the LED shall blink twice to
acknowledge the new setting.
4.2.3 Changing the brand setting of your
remote control for TV, VCR, DVD or
Amplifier-Tuner
Refer to chapter 11 for brand setting procedure.
4 Preparing, setting and using your Remote Control
English
