Philips 55PL9524/37, Руководство пользователя

Страница: 28 / 245

Error code definition
In case of non-intermittent faults, clear the error buffer before starting the repair. Make sure “old” error
codes are not present. If possible check the entire content of the error buffers. In some situations an error
code is only the result of another error code (and not the actual cause).
Note: A fault in the protection detection circuitry can also lead to a protection.
Error codes 01,02, 03, and 04 are protection codes, and in this case the supplies of some circuits will be
switched off. Also in protection, the LED will blink the number of times equivalent to the most recent error
code.
Error
Code Description
1 NVM (M24C32)
2 HFB protection
3 Picnic (SAA4978)
4 5VProtection
5 8V Protection
6 Slow I2C bus blocked
8 HIP I/O-video processing (TDA9320)
9 Wireless Expander (PCF8574)
12 Topic (LTP Peaking) (TDA9178)
13 Tuner Protection
14 ITT sound processor (MSP3411/3412/3452)
15
3D Combfilter protection (
µ
PD64083)
16 Feature Box Protection (FBX)
17 I/O Expander HD Interface (M62320P)
18
Fast I2C bus blocked
19 Auto Scavem DAC (TDA8444)
21 PIP I/O Expander (M62320P)
22 PIP BOCMA (TDA888X)
23 PIP Tuner
24 PIP Muppet (SAB9081)
25 PIP V-Chip (Z86130)
26 Falconic (SAA4992)
27 Eagle device
28 Back Current loop
32 Flash Ram (EPG)
36 Light engine shutdown Protection Error
37 Light engine shutdown protection. Spontaneous blinking 37-37-37.
38 Lamp Failure.
39 Light engine polarizer fan failure, protection error.
41 Shutdown protection error, spontaneous blinking 41-41-41. GDE not responding
42 Not protection error. GDE NVM error
43 Fan Fault. Not protection error. Shut down if error exists continuously for 2 minutes
44 Ambient Temperature Warning. Not protection error. Message should be displayed for
6 seconds and every 15 minutes as long as temp is above ambient temp.warning
45 High temperature alert. Not protection error. Shut down message should be displayed
and system should enter standby after 1 minute if the temperature exceeds this limit.
46 Audio fault (audio board). Not protection error.
47 Audio fault (audio board). Not protection error.
48 Thermo cutoff SW. Protection error