Philips 32PFL74 6M Series, Руководство пользователя

Страница: 41 / 74

EN 41
En
gl
is
h
Fine-tune channels
If the reception of an analogue TV channel is
poor, fine-tune the TV channel.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation] .
3. Select
[Analogue: Manual installation]
>
[Fine tune] , and then press OK .
4. Press or to fine-tune the channel.
5. When you have selected the correct
channel frequency, select
[Done]
, and then
press OK .
6. Select one of the following options, then
press OK .

[Store current channel] : Store the
channel as the current channel number.

[Store as new channel]
: Store the
channel as a new channel number.
Reinstall channels
ATTENTION: This feature is intended for
dealers and service personnel.
You can copy channel lists from one Philips
TV to another through a USB storage
device. You do not need to search for
channels or install them again on the second
TV. The channel list file is small enough to fit
on any USB storage device.
What you need
The two Philips TVs must have:

the same country setting,

the same year range,

the same DVB type, as indicated by the
suffix (H, K, T, or D/00) in the model
name,

the same settings for satellite channels,
including the number of LNB satellites

the same hardware type, as indicated
by the sticker on the back of the TV,
(for example Qxxx.xx.Lx), and

compatible software versions.
An onscreen message will notify you if the
channel list cannot be copied to the second
TV.
Note:
If you are prompted to enter a code,
enter '8888'.
Copy channel list to USB
1. Connect a USB storage device to the TV
with the channels installed on it.
2. Press .
3. Select
[Setup]
>
[TV settings]
>
[Preferences]
>
[Channel list copy]
>
[Copy to USB] , then press OK . The channel
list is copied to the USB storage device.
4. Unplug the USB storage device.
Copy channel list to TV with no channels
installed
1. Switch on the TV with no channels
installed on it to start the initial installation.
Select the language and country. The
country setting must be the same as that of
the TV whose channel list you want to copy.
Skip the search for channels.
2. Connect the USB storage device
containing the channel list to the TV.
3. Press .
4. Select [Setup] > [TV settings] >
[Preferences] > [Channel list copy] >
[Copy to TV] , then press OK .The channel
list is copied to the TV.
5. Unplug the USB storage device.
Copy channel list to TV with channels
installed
1. Switch on the TV on which you want to
copy the channel list.
2. Press .
3. Select [Setup] > [Search for channels] >
[Reinstall channels] , then press OK .
You will be prompted to select the country
where the TV was installed. Make a note of
the current setting and press followed by
[Cancel] to exit.
4. If the country setting on the TV is different
from that of the TV whose channel list you
want to copy, reinstall the TV and select the
country setting to match the first TV. See
Set
up your TV > Reinstall the TV
(Page 44).
5. Connect the USB storage device
containing the channel list to the TV where
you want to copy the channel list.