31
English
Manually install digital
channels
You can search and store digital TV channels
one at a time.
1
Press .
2
Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Digital:
Reception test]
>
[Find channel]
, then
press
OK
.
3
Press the
Numeric buttons
to enter the
channel frequency.
4
Select
[Search]
, then press
OK
.
5
When the correct channel is located, select
[Store]
, then press
OK
.
6
To exit, press .
Note
•
If the reception is poor, reposition your antenna and
repeat the procedure.
•
If you receive the channel with DVB-C, select
[Symbol
rate mode]
>
[Automatic]
, unless your cable provider
supplies you with a specific symbol rate value.
Rename channels
You can rename channels. The name appears
when you select the channel.
1
While you watch TV, press
FIND
.
»
The channel matrix menu is displayed.
2
Select the channel to rename.
3
Press
OPTIONS
.
»
The channel options menu appears.
4
Select
[Rename channel]
, then press
OK
.
»
A text input box appears.
5
Press
to select each character,
then press
OK
.
6
When the name is complete, select
[Done]
, then press
OK
.
Tip
•
Press
[Aa]
to change an uppercase letter to a
lowercase letter and vice versa.
Manually install analogue
channels
You can search and store analogue TV channels
one at a time.
Step 1: Select your system
Note
•
If your system settings are correct, skip this step.
1
Press .
2
Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Analogue:
Manual antenna installation]
>
[System]
,
then press
OK
.
3
Select the correct system for your country
or region, then press
OK
.
Step 2: Search and store channels
1
Press .
2
Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Analogue:
Manual antenna installation]
>
[Find
channel]
, then press
OK
.
•
If you know the three-digit frequency
of the channel, enter it.
•
To search, select
[Search]
, then press
OK
.
3
When the channel is found, select
[Done]
,
then press
OK
.
•
To store the channel as a new number,
select
[Store as new channel]
, then
press
OK
.
•
To store the channel as the previously
selected channel, select
[Store
current channel]
, then press
OK
.
Step 3: Fine-tune channels
1
Press .
2
Select
[Setup]
>
[Channel settings]
>
[Analogue: Manual antenna installation]
>
[Fine-tune]
, then press
OK
.
3
Press
to fine-tune the channel.
EN