2-3-5-2 Get Instant Power Consumption (Watt) from endpoint
METER_GET example
：
COMMAND_CLASS_MULTI_CHANNEL
MULTI_CHANNEL_CMD_ENCAP
Source End Point = 0x05
(this is the endpoint of command inquirer,
here we assume endpoint is 5
，
if the
inquirer doesn’t support multi Channel this
value will be 0)
(Bit Destination End Point =
0x03)
(Bit Address =0
；
Destination End Point
range 1~3)
Command Class = 0x32
( Command_Class_Meter_V3 = 0x32)
Command =0x01
(Meter_Get = 0x01)
Parameter 1 = 0x10
(Scale = W = 0x02)
PAN04 Instant Power Consumption (W) Report example
：
COMMAND_CLASS_MULTI_CHANNEL
MULTI_CHANNEL_CMD_ENCAP
Source End Point = 0x03
(Meter report = Endpoint3)
(Bit Destination End Point = 0x05) (Bit Address =0
；
Destination End Point =
command inquirer’s Endpoint value)
Command Class = 0x32
(Command_Class_Meter_V3 = 0x32)
Command =0x02
(Meter_Report = 0x02)
Parameter 1 = 0x21
(Scale Bit2 = 0, Rate Type = 0x01
，
Meter Type=0x01)
Parameter 2 = 0x34
(Precision = 1
，
Scale Bit1Bit0 =
0x02
，
Size = 4)
Parameter 3 = 0x00
Instant Power Consumption =
0x000003EA
= 100.2W
Parameter 4 = 0x00
Parameter 5 = 0x03
Parameter 6 = 0xEA
2-3-5-3 Get load voltage V from endpoin
t
Meter_GET example:
COMMAND_CLASS_MULTI_CHANNEL
MULTI_CHANNEL_CMD_ENCAP
Source End Point = 0x05
(this is the endpoint of command inquirer,
here we assume endpoint is 5
，
if the
inquirer doesn’t support multi Channel this
value will be 0)
(Bit Destination End Point =
(Bit Address =0
；
Destination End Point
12
