EN - 6
12/2015
Copyright © 2015, Fast ČR, a. s.
Openings must not be blocked by carpet.
The air outlet must not be connected to a chimney fl ue that is used
for extracting vapours from gas boilers or other gases, etc.
The appliance must not be installed behind lockable doors, sliding
doors or doors that close directly opposite the door of the dryer.
In such a case, it is always necessary to leave the door of the dryer
always open.
Do not install the appliance in a damp environment.
This appliance is not designed to be built-in.
WARNING!
To prevent a fi re from starting, injury by electrical shock or another
accident, adhere to the following:
Only use the appliance under the voltage indicated on the rating
label. If you are not certain of the voltage in your home, please
contact your power company.
If you use the heating function, the maximum current during
the operation of the appliance is 10 A. Therefore, ensure that the
power units (current, voltage and power cord) meet the current
load requirements of this appliance.
Prevent the power cord from being damaged. The power cord
must be located in such a way that it is not stepped on, that no
items are place on top of it or that it is not possible to damage it.
Special attention must then also be paid to the power socket. The
power socket must be freely and easily accessible for immediate
disconnection of the plug.
Do not overload the power socket or use extension cords. Overloading
the power socket may result in a fi re or injury by electrical shock. Do
not touch the power socket or plug or power cord with wet hands.
To ensure your safety and safety of your environment, make sure
that the power socket is properly grounded.
