EN - 24
12/2015
Copyright © 2015, Fast ČR, a. s.
WARNING!
To prevent burns, water should be drained after the water inside the washing machines cools down.
Cleaning the laundry detergent drawer
1. Press the safety stopper marked with an arrow in the fabric softener
compartment.
2. Lift the stopper and pull out the fabric softener cover and wash the
individual compartments with water.
3. Return the fabric softener cover and slide in the laundry detergent
drawer back into the washing machine.
Cleaning the infl ow fi lter
The water supply fi lter needs to be cleaned if there is no water or an
insuffi
cient amount of water after opening the water tap.
Cleaning the tap fi lter:
1. Close the tap.
2. Start any program excluding the Washing or Draining and spinning.
3. Press the Start/Pause button and let the program run for approx. 40
seconds.
4. Disconnect the water supply hose from the tap.
5. Rinse out the fi lter with water.
6. Reconnect the water supply hose.
Cleaning the washing machine fi lter
1. Disconnect the water supply hose from the rear side of the washing
machine.
2. Use long pliers to pull out the fi lter, rinse it with water and reinstall it.
3. Reconnect the water supply hose.
4. Open the tap making sure that water is not leaking anywhere.
5. Close the tap.
NOTE:
It generally applies that the tap fi lter is cleaned fi rst and only then
the washing machine fi lter is washed subsequently.
If you clean only the washing machine fi lter, then it will be necessary
to repeat steps 1-3 for cleaning the tap fi lter.
