Philco PD 1562 W, Руководство пользователя

Страница: 34 / 40

EN - 32
Copyright © 2017, Fast ČR, a. s. 06/2017
Problem Possible Causes What To Do
Cloudiness
on glassware Combination of soft
water and too much
detergent Use less detergent if you have soft water and select a shortest
cycle to wash the glassware and to get them clean.
Yellow or
brown fi lm
on inside
surfaces Tea or coff ee stains Using a solution of 1/2 cup of bleach and 3 cups of warm water
to remove the stains by hand.
WARNING
You have to wait for 20 minutes after a cycle to let the heating
elements cool down before cleaning interior; otherwise, burns
will happen.
Iron deposits in water
can cause an overall
fi lm You have to call a water softener company for a special fi lter.
White fi lm
on inside
surface Hard water minerals To clean the interior use a damp sponge with dishwasher
detergent and wear rubber gloves. Never use any other cleaner
than dishwasher detergent for the risk of foaming or suds.
The
Detergent
dispenser
lid cannot
be closed
properly Clogged detergent
residue is blocking the
catch Clean the detergent from the catch.
Detergent
left in
dispenser
cups Dishes block detergent
Cups Re-loading the dishes properly.
Steam Normal phenomenon There is some steam coming through the vent by the door latch
during drying and water draining.
Black or gray
marks on
dishes Aluminum utensils
have rubbed against
dishes Use a mild abrasive cleaner to eliminate those marks.
Water
standing on
the bottom
of the tub This is normal A small amount of clean water around the outlet on the tub
bottom keeps the water seal lubricated.
Dishwasher
leaks Overfi ll dispenser or
rinse aid spills Be careful not to overfi ll the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and lead to
overfl owing. Wipe away any spills with a damp cloth.
Dishwasher isn’t level Make sure the dishwasher is level.