Philco PD 1562 W, Руководство пользователя

Страница: 24 / 40

EN - 22
Copyright © 2017, Fast ČR, a. s. 06/2017
Turning on the Appliance
Starting a wash cycle...
Draw out the lower and upper basket, load the dishes and
1. push them back. It is recommended to load the lower basket fi rst, then the upper one (see the section
entitled “Loading the Dishwasher”). Pour in the detergent (see the section entitled “Salt, Detergent and
Rinse Aid”).
2. Insert the plug into the socket. The power supply is 220-240V AC 50 Hz, the specifi cation of the socket is 12
A 250 VAC.50 Hz.
Make sure that the water supply is turned on to full pressure. Close the door, press the “Power” button, press the
“program” button to select a desired “Wash cycle”. (See the section entitled “Wash Cycle Table”.)
With a little force to ensure the door is properly closed.
NOTE:
A click could be heard when the door is closed perfectly.
When the washing is over, you can shut off the switch by pressing “Power” button.
Switching on
1. Open the tap, if it is closed.
2. Close the door.
3. Make sure the spray arms are not obstructed.
4. Switch the dishwasher on using the “Start/Pause” button.
Select a programme
Choose your programme according to the type of load and how dirty it is.
The diff erent programmes and their uses are described in the programme chart later on in this booklet. Use the
programme selector to select the expected programme.
Change the Programme
Premise: A cycle that is underway can only be modifi ed if it has only been running for a short time.
Otherwise, the detergent may have already been released, and the appliance may have already drained the
wash water. If this is the case, the detergent dispenser must be refi lled (see the section entitled “Fill in the
Detergent”).
1. Press “Power” button to cancel the programme.
2. Turn on it again and you can change the programme to the desired cycle setting (see the section entitled
“Starting a wash cycle. . .”).
NOTE:
If you open the door when the washing cycle underway, the appliance will pause and emit warning
signals, the digital display show “E1” and fl ash. When you close the door, the machine will keep on
working after 10 seconds.
Forget to Add Dish
A forgotten dish can be added any time before the detergent cup opens.
1. Open the door a little to stop the washing.
2. After the spray arms stop working, you can open the door completely.
3. Add forgotten dishes.
4. Close the door, the dishwasher will work after ten seconds.