Philco PD 1562 W, Руководство пользователя

Страница: 30 / 40

EN - 28
Copyright © 2017, Fast ČR, a. s. 06/2017
Connecting the water outlet hose
Fit the drainage hose of your machine to the drainage pipe without bending.
If the length of the hose is not suffi
cient, apply to the authorized service for an extension made from the same
material as the original. Remember that the length of the hose should not exceed 4meters even when with an
extension.
If the drainage hose is longer the 4 m. the dishes will not be cleaned properly secure your hose fi rmly to the
drainage pipe to avoid it coming off during the washing process.
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
≐
the socket is earthed and complies with current regulations;
≐
the socket can withstand the maximum load of the appliance, which is indicated on the data plate located
on the inside of the door(see description of the appliance);
≐
the power supply voltage falls within the values indicated on the data plate on the inside of the door;
≐
the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician
to replace the plug (see assistance); do not use extension cables or multiple sockets.
* For optional
Once the appliance has been installed, the power supply cable and the electrical socket should be easily
accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance
Service in order to prevent all potential hazards.(See Assistance)
The company shall not be held responsible for any incidents that occur if these regulations are not
observed.
Advice regarding the fi rst wash cycle
After the appliance has been installed, immediately before running the fi rst wash cycle, completely fi ll the salt
dispenser with and add approximately 2 Kg of salt (see Rinse aid and refi ned salt). The water may overfl ow: this
is normal and is not a cause for concern. It is also normal that the LOW SALT indicator light continues to fl ash
for a few cycles after the salt has been loaded.
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be
positioned to the right or the left to facilitate proper installation.