Philco PD 1562 W, Руководство пользователя

Страница: 29 / 40

EN - 27
Copyright © 2017, Fast ČR, a. s. 06/2017
PART 7: INSTALLATION
Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or
moved, please ensure the manual is kept with the machine, so that the new owner may benefi t from the
advice contained within it.
Please read this instruction manual carefully: it contains important information regarding the safe
installation, use and maintenance of the appliance.
If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may
be tilted onto its back.
Positioning and leveling
1. Remove the appliance from all packaging and check that it has not been damaged during transportation.
If it has been damaged, contact the retailer and do not proceed and further with the installation process.
2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets
or even with the wall. This appliance can also be recessed under a single worktop.
3. Position the dishwasher on a level and sturdy fl oor. If the fl oor is uneven, the front feet of the appliance
may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees).
If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations
and noise while it is operation.
Connecting the water and electricity supplies
Connection to the water and electricity supplies should only be performed by a qualifi ed technician.
The dishwasher should not stand on top of the water hoses or the electricity supply cable
The appliance must be connected to the water supply network using new piping. Do not use old piping.
* Connecting the water inlet hose
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly
in place.
If the water pipes are new or have not been used for an extended period of time, let the water run to make sure
that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet
can get blocked and the appliance could be damaged.