Phihong USA Corporation
•
East Coast Engineering Center
•
630 Johnson Ave. Suite 102, Bohemia, NY 11716
•
Tel: (631) 610-2289
www.Phihong.com
Help Menu:
Help Menu
Example Format to type
debug [on | off ]
debug on
debug off (recommended unless troubleshooting)
exit Exit
password
administrator (default password)
reboot Reboot
set community get [string]
set community get public or private
set community set [string]
set community set public or private
set default
set default
set IP [x.x.x.x]
set IP 192.168.1.107
set subnet [x.x.x.x]-
set subnet 255.255.255.0
set accctrl [on | off ]
set accctrl on (Allow access for up to four IP address)
set accctrl off (default setting, all access allowed)
Set acclist [n] [x.x.x.x]
Accessible address is the IP addresses that are allowed to
read and write SNMP commands to the NIC Interface
Midspan. You can set the IP addresses in the Controller
Setup or HyperTerminal.
set acclist 1 192.168.1.102
set acclist 2 192.168.1.103
set acclist 3 192.168.1.104
set acclist 4 192.168.1.105
set traphost [n] [x.x.x.x]
Trap hosts are the destination IP addresses that you want the
Traps to be sent to. You can set the IP addresses in the
Controller Setup or HyperTerminal.
set traphost 1 192.168.1.112
set traphost 2 192.168.1.113
or
www.Midspans.com
46
