Phihong USA Corporation
•
East Coast Engineering Center
•
630 Johnson Ave. Suite 102, Bohemia, NY 11716
•
Tel: (631) 610-2289
www.Phihong.com
4.5 GUI Parametric Information:
This section allows users to review, but not edit, the Parametric Information for each port.
Figure 19: Parametric Information
The Port Parametric Information panel has the following set of parameters that are displayed:
•
Discovery R (ohms) – This value represents the discovered resistance (R) of the port in ohms.
•
Current (mA) – This value represents the current (I) of the port in milliamps.
•
Voltage (V) – This value represents the voltage (V) of the port.
•
Power (mW) – This value represents the power of the port in milliwatts.
•
Class Current (mA) – This value represents the class current of the port in milliamps.
•
Determined Class – This value represents the class of the discovered device.
Note:
If the ports are less than 24-ports for the system, those ports greater than the total system
port count will read all zeros “0.”
or
www.Midspans.com
25
