Phason Natural Ventilation Control, Руководство пользователя

Страница: 3 / 24

Phason Natural Ventilation Control
33140002 3
Becoming familiar with the NVC-2
Main display
The main display shows the temperature and any alarm messages. The main display is what you see
when you are not in a menu or settings display.
Here are some things to know about the main display.
 When a relay is on, the status LED for that relay is lit.
 When there is an alarm condition, the display flashes between the alarm message and the current
temperature. For more information about alarms, read
Alarm settings and conditions
on page
13.
 When the control is in manual override mode:

For the curtain
, the Open and Close LEDs will blink three times and then stay off for one
second.

For the heater
, if the heater is ON, the
Heat
LED will blink three times and then stay ON
for one second; if the heater is OFF, the LED will blink three times and then stay OFF for
one second.
For more information, read
Using manual override mode
on page 16
Down
▪
Scroll down
▪
Decrease a value
Up
▪
Scroll up
▪
Increase a value
Select
▪
Select an option
▪
Accept a value
Back
▪
Go back
▪
Cancel changes
Alarm LED
▪
Shows when there is an alarm condition
Test LED
▪
Shows when test mode is active
Version LED
▪
Shows the firmware version
Programming LEDs
▪
Show which setting is being
displayed or programmed
Status LEDs
▪
Show the status of the relays
▪
Show which relay is being
controlled
Programming LEDs
▪
Show which setting is being
displayed or programmed