Phason Natural Ventilation Control, Руководство пользователя

Страница: 5 / 24

Phason Natural Ventilation Control
33140002 5
NVC-2 layout
Incoming power terminal: connect the incoming power (85 to 264 VAC, 50/60 Hz) to this terminal. For more
information, read Connecting the power source on page 8.
Open and close relay terminals: connect a curtain machine to these terminals. For more information, read
Connecting a curtain machine on page 6.
Heater relay terminal: connect a heater or furnace to this terminal. For more information, read Connecting a gas-
fired furnace or electric heater on page 6.
Temperature probe terminal: connect the temperature probe to this terminal. For more information, read
Connecting on page 7.
Display connector:
make sure the ribbon cable from the display is properly connected.
Alarm relay terminal: connect an external alarm system or siren to this terminal. For more information, read
Connecting an alarm system on page 7.
Input terminal: connect an optional Rain Sensor to this terminal. For more information, read Phason Rain Sensor
on page 21.
USB connection: connect a USB memory stick to this connector to update the firmware. For more information,
read Updating the firmware on page 19.
1
2
3
4
5
6
7
8
9
+ IN –
INPUT
CC CA OA
ALARM
L N
AC LINE
OPEN CLOSE HEAT
TEMP
USB
1 2 3 4
5
6
7 8
9