background image

Natural Ventilation Control 

Phason 

22  

2013-08-26 

The advanced optical sensor uses infrared light to detect water hitting its surface. This method of  
detection is more sensitive and reliable than other methods, is nearly immune to false detection, and 
is not affected by movement and most environmental conditions.  

The Phason Rain Sensor's durable and rugged enclosure is completely sealed, so there are no 
electronics to corrode, and no openings for debris to collect.  

 

Power contactors 

Phason’s 240-volt power contactors are heavy-duty relays that increase the load handling capability 
of  control relays. Power contactors are ideal for electric heaters.  

 

Power contactor relay 

(PC-240): includes power 

contactor relay and mounting hardware for easy 
mounting in an enclosure.  

 

Power contactor kit

 (122-1): includes power 

contactor relay, on-off-auto switch and label, snubber 
filter (reduces electrical noise), and mounting hardware 
for easy mounting in an enclosure. 

 

Power contactor unit

 (129-0): includes two power 

contactor relays, two on-off-auto switches, and two 
snubber filters, mounted in a large enclosure. The 
enclosure has room for two additional contactor relays or 
kits. 

 
 

Temperature probes and extension cable 

Temperature probes monitor temperatures ranging from –49 to 122°F 
(-45 to 50°C). The probes are available in 1, 6, 30, 75, or 150-foot cable 
lengths and can extended up to 500 feet using extension cable. 
Extension cable is available in 500-foot lengths. 

 
 

Features 

 

Easy installation  

 

Rugged and durable design  

 

Weather and UV-resistant cable  

 

Limited warranty (90 days) 

 

Содержание Natural Ventilation Control

























Отзывы: