Phase Technology JFA-70X, Руководство пользователя

Страница: 31 / 38

70Xi Cold Flow Properties Laboratory Analyzer User Guide
31
10. Re-fit the desiccant cup onto the top housing by pushing the bottle all the way into the housing.
Keep the bottle in upright position.
11. Replace the desiccant cup protector and connect it to the top housing. Lock the desiccant cup
protector in place by turning it clockwise until a ‘click’ is heard.
12. Re-connect the dryer bottle to the analyzer. Push the connectors towards the analyzer until a
'click' is heard.
Important Considerations When Replacing the Desiccant:

Replace the desiccant in the dryer bottle after every 300 test runs. Higher humidity in your lab
means more frequent replacement may be required.

Avoid exposing the desiccant to the atmosphere for any length of time. It absorbs moisture
quickly, and exposure means more frequent replacement.

Always use a fresh package of desiccant.

Never try to recharge desiccant. Dust created by this process will circulate through the purge
system and will damage vital components and void the warranty.

Only use desiccant supplied by Phase Technology.

Replace the dust filter ring every 5 desiccant packages, or approximately every 1500 runs.
Replace the dryer bottle o-ring once yearly or if it is damaged.

Join the dryer bottle connection ends together if the dryer bottle is not connected to the analyzer.
This prevents inadvertent moisture absorption.

When reassembling the dryer bottle, ensure that all o-rings are in place, all connections are
properly seated in the analyzer connectors, and that all seals are air (and thus moisture) tight.

Keep the lid of your analyzer closed and latched when not in use to prevent humid air from
entering the purge system through the chamber inlets.
CAUTION!
Use desiccant provided by Phase Technology only. Use of
other desiccant or recharging desiccant will VOID WARRANTY.
Ordering information:
Dryer Desiccant (5-pack) DRD-605P
Dryer Desiccant (10-pack) DRD-610P
Dryer Bottle O-ring Replacement Kit P/N: 101-02-6745
Screen Protector for touch screen PFILM-70Xi
Cotton Swabs COTSWAB (10 packs of 400 per pack)