PFT PFT G4, Руководство по эксплуатации, Страница: 23 / 68

3)7*67$1'$5' 86$
6HWWLQJXSWKHPDFKLQH
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
________________________________________________________________________________________
:$51,1*
Make sure that connections of couplings are clean and correct. Connect hoses to
PRUWDUSUHVVXUHJDXJH
and again observe mortar hoses seals!.
16. Connect the spray gun (fine plaster or insulating plaster crimp valve spray gun) to
the mortar hose.
17. Press the latching button and open the air tap on the spray gun. The machine
starts. Now you can begin plastering. First, an extremely thin mixture comes out
of the spray gun, then the mortar comes out in the right consistency. If necessary,
the flow can be regulated with the needle valve.
18. The machine can be switched on and off by opening and closing the air tap on
the spray gun.
127(
If you are working without an air supply (e.g. when pumping floor screed material), the
machine is switched on and off by a 42 V remote control. (To make this possible, the
blind connector on the control coupling must be removed and the control connector of
the remote control must be plugged in.).