PFT 00 65 93 41 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 72

PFT 00 65 93 41 Скачать руководство пользователя страница 21

Mixing pump RITMO L Eco Overview - Operation

Intended use air compressor

12 April 2019 13:43:00

21

WARNING!

Danger due to improper use!

Any case of use beyond the specified purpose of use
and/or any other sort of use of the tool can lead to
dangerous situations.

Therefore:



Use the tool only for the purpose specified.



Always adhere to the usage directives of the material
manufacturer.



Strictly follow all instructions in this operating manual.

Claims of any kind due to damage caused by improper use will not
be entertained.

The operator of the tool is solely responsible for any damage
arising from improper use.

18 Intended use air compressor

18.1 Intended use air compressor

The tool is conceptualised and designed exclusively for the
purpose of use specified here.

Attention!

The  air  compressor  is  intended  exclusively  for  the
generation  of  compressed  air  and  is  to  be  used  with
connected implement. Any other use or use beyond what
is  specified,  such  as  with  freely  accessible  and/or  open
hoses  and  pipelines,  is  considered  as  not  intended.
Connected  implements  or  components  are  to  be
designed for the maximum generated pressure of 1.8 bar.

The air compressor is to be used only in technically
perfect condition as well as for its intended use and while
taking into account the safety and hazard information in
the operating instructions!

Particularly malfunctions that may compromise safety
have to be eliminated immediately prior to putting the
compressor back into operation.

«
...
19
20
21
22
23
...
»

Содержание 00 65 93 41









































































Отзывы:

Нет отзывов