PFS GB267, Инструкция по эксплуатации, Страница: 6 / 32

6 GB267 I01
2. Introduction
2.1 Scope of application
The rotational peeling tool is meant exclusively for the removal of the oxide layer on polyethylene (PE) pipes
as preparation for electrofusion (EF). Additionally it is approved for usage on polypropylene (PP) and cross-
linked polyethylene (PE-X) pipes.
The rotational peeling tool can universally be used to peel pipe ends (for welding fittings) and to peel spots
on pipes (for welding saddles). By using an optional extension you can also peel saddle outlets and short
spigot fittings in the dimensions 32 mm, 40 mm, 50 mm and 63 mm.
Intended use
It is not allowed to use the tool for any application not covered by the above stated terms.
Modifying the tool without consulting the manufacturer is forbidden and shall be considered as
improper use.
The manufacturer is not liable for use of the Rotational Peeling Tool that falls outside its
application scope!
2.2 Maintenance and service
Should the tool fail despite the great care taken in manufacturing and testing it, the necessary repairs should
only be carried out by an after-sales service centre authorised by the manufacturer.
Please note that the product is a technically demanding machine for field application. In accordance to the
applicable standards the tool is subject to periodical maintenance. The maintenance interval is 12 months,
with heavy use shorter intervals are recommended.
During maintenance, the tool will be upgraded to the current technical standard of our devices and you get a
3-month guarantee on function for the maintained tool.
The maintenance and the related checks are important for your safety and the continuous working reliability
and safety of the tool. Therefore, the maintenance and all necessary repairs, have to be carried out by the
manufacturer or an authorised service point.
For further information about our after-sales service centres please contact:
PF-Schweißtechnologie GmbH Tel.: +49-6631-9652-0
Karl-Bröger-Str.10 Fax: +49-6631-9652-52
DE-36304 Alsfeld E-Mail: info@pfs-gmbh.com
Germany Web: www.pfs-gmbh.com
In all correspondence, please provide the serial number (S/N) as shown on the type plate of the tool.
2.3 Handling and maintenance
To achieve an optimum work results the tool has to be handled with care and maintained frequently.
Pollution by sand and dirt has to be avoided or, if necessary, removed with a soft cloth or a Q-tip.
2.4 Disposal
The rotational peeling tool must be disposed of in an environment-friendly way sorted by materials.