PFS GB267, Инструкция по эксплуатации, Страница: 13 / 32

GB267 I01 13
7. Scraping
Due to the patented features of the tool, like the quick adjustment, the ovality compensation and the tiltable
blade, an easy adjusting and installation of the tool on various pipe dimensions as well as an even chip
removal on pipes with ovalities or conical ends can be easily performed.
Note
The numbers in brackets refer to the respective overview in chapter 6 "Overview and spare parts".
The following procedure for peeling with the rotational peeling tool is valid for both versions (20-
63 mm and 20-125 mm). If there are any specialties, they will be mentioned seperately.
7.1 Preparation
Step Action
1 Cleaning the pipe
1.1 Use a clean cloth free of dirt and grease to remove mud, sand and dirt from the surface you want
to peel. If necessary additionally use certified pipe cleaner.
2 Mark the area you want to peel
2.1 Mark the insertion depth of the fitting resp. the area of contact of the saddle according to the
processing guidelines of the fitting manufacturer with a certified marker. The area to be peeled
should be marked with wave-like markings.