PFS GB267, Инструкция по эксплуатации, Страница: 18 / 32

18 GB267 I01
Step Action
2 Setting the dimension range
2.1 Turn the knurled knob approx. 4-5 Turns counterclockwise. The feeding block will come loose and
turnable.
2.2 Make sure that you can freely turn the feeding block. If this is not the case, turn the knurled knob
counterclockwise until the feeding block can be turned freely without blocking.
2.3 Turn the feeding block 180° so that the opposite number, either "-63" or "-125" points towards you.
2.2 Then carefully press the feeding block upwards. If you have correctly turned and adjusted the
feeding block, you will be able to press it completely against the upper running shell and is will rest
fully against it with its flat side.
NEVER press the feeding block forcefully upwards against resistance and never tighten it unless it
rests completely against the upper running shell.
Failure to comply with these preconditions will result in damage to the Rotational peeling
tool.