PFS GB267, Инструкция по эксплуатации, Страница: 25 / 32

GB267 I01 25
7.5 Scraping the pipe
Step Action
1 Clamping and fixing the pipe
1.1 Fix or clamp the pipe before you begin scraping it to improve the scraping result and prevent
accidents.
2 Finding the correct posture to peel
2.1 Position yourself so that the cutting edge of the peeler blade of the mounted tool faces towards
you.
2.2 Your position should ideally be 90° to the pipe so that no axial forces influence the set feed of the
tool.
3 Scraping procedure
3.1 Grip the peeling tool by the adjustment knob and pull it straight towards you.
3.2 Watch how the chip is removed. If the peel width is maximum 2/3 of the blade width continue
moving the rotational peeling tool around the pipe until you have peeled the desired area of the
pipe surface.
Note
If the peel is wider than 2/3 of the blade width check if you work with the correct dimension setting
for the feed.
7.6 Taking the rotational peeling tool off
Step Action
1 Reduce tensioning
1.1 To remove the rotational peeling tool from the pipe first reduce the mounting force to the pipe by
turning the adjusting know counter-clockwise.
1.2 As soon as the mounting force is reduced you can open the rotational peeling tool by pressing the
quick release catch (2) and take it off.
Note
After removing the tool from the pipe always make sure that you have completely peeled the desired
area.
When using the Rotational Peeling Tool on pipes of varying sizes you must make sure each time
that you work with the correct dimension setting for the feed.
7.7 Additional notes

In case of an insufficient scraping result the blade has to be replaced.

In consideration of the processing guidelines of the fitting manufacturer and the tolerances specified
therein (max. gap between pipe and fitting) the pipe may be peeled a second time.

The peeler blades are subject to wear

Use only on cleaned pipe surfaces.

Keep the rotational peeling tool clean and dry in the suitcase.

The thickness of the peeling must be checked with a suitable measuring instrument on a regular
basis.