EN – 16
Reassembling the
pumping module
with no flanged
stator
(see page N – 6)
1
Fit the front plate (
19
) on the
frame (
42
).
2
For not damage the shaft seal, use
protective sleeve on the rotor axis (or
wrap end of shaft with adhesive tape)
and oil it.
3
Place the BP Rotor (
23
) equipped with
its vanes and springs (rounded edges
facing outwards) on the front plate (
19
).
Remove the protective sleeve.
4
Slide the BP stator (
26
)
on the BP rotor (
23
).
5
Place the central plate (
29
) on the BP
stator (
26
).
6
Place the HP rotor (
31
) equipped with its
vanes and springs (rounded edges facing
outwards) on the central plate (
29
).
Sleeve
29
31
23
26
19
7
Slide the HP stator (
34
) on the HP
rotor (
31
).
8
Place the rear plate (
7
) on the HP
stator (
31
).
34
7
Reassembling the pump (cont’d)
