background image

4

About this manual

1

About this manual

1.1

Validity

This operating manual is for customers of Pfeiffer Vacuum. It describes the functioning 
of  the designated product and provides the most important information for safe use of 
the unit. The description follows applicable EU guidelines. All information provided in this 
operating manual refers to the current state of the product's development. The documen-
tation remains valid as long as the customer does not make any changes to the product.
Up-to-date operating instructions can also be downloaded from 
www.pfeiffer-vacuum.com. 

1.1.1

Applicable documents

*also available via www.pfeiffer-vacuum.com

1.2

Conventions

1.2.1

Safety instructions

The safety instructions in Pfeiffer Vacuum operating instructions are the result of risk 
evaluations and hazard analyses and are oriented on international certification stan-
dards as specified by UL, CSA, ANSI Z-535, SEMI S1, ISO 3864 and DIN 4844. In this 
document, the following hazard levels and information are considered:

HiCube Pro

Operating instructions

Declaration of Conformity

Part of this document

Operating instructions for components

see product description*

DANGER

Imminent danger

Indicates an imminent hazardous situation that will result in death or serious injury.

WARNING

Possibly imminent danger

Indicates an imminent hazardous situation that can result in death or serious injury.

CAUTION

Possibly imminent danger

Indicates an imminent hazardous situation that can result in minor or moderate injury.

NOTICE

Command or note

Command to perform an action or information about properties, the disregarding of 
which may result in damage to the product.

Содержание HICUBE PRO







































Отзывы: