16
Installation
With rigid pipe connections: Install bellows for attenuation of vibrations in the connec-
tion line.
5.6
Transportation lock
Turbo pumping stations of the HiCube Pro line are equipped with transportation lock for
the backing pumps (see label). The transportation lock consists of two opposing knurled
screws with spring suspension which fasten the backing pump's bottom plate.
Loosen the knurled screw of the transportation lock.
Similarly loosen the transportation lock on the opposite side.
5.7
Filling up the operating fluid
Only applies to HiCube with rotary vane pump as backing pump!
●
The operating fluid reservoir is already filled and installed for the turbopump.
●
The dry compressing backing pump ACP is already filled with lubricant.
●
The operating fluid for the rotary vane pump is enclosed with the delivery.
Unscrew the operating fluid bottle's screw plug and screw the filler tube (both included
in the equipment pack).
Fig. 5:
Transportation lock at HiCube Pro
101 Transportation
lock
101
101
2x !
