Adjustment
79
13 Adjustment
13
.01
Notes on adjustment
All following adjustments are based on a fully assembled machine and may only be carried
out by expert staff trained for this purpose.
Machine covers, which have to be removed and replaced to carry out checks and adjust-
ments, are not mentioned in the text.
The order of the following chapters corresponds to the most logical work sequence for ma-
chines which have to be completely adjusted. If only specifi c individual work steps are
carried out, both the preceding and following chapters must be observed.
Screws, nuts indicated in brackets ( ) are fastenings for machine parts, which must be loo-
sened before adjustment and tightened again afterwards.
Unless stated otherwise, during all adjustment work the machine
must be disconnected from the electric and pneumatic power supply!
Danger of injury if the machine is started accidentally!
Before all adjustment work switch the machine off and let it cool down!
Danger of burns if the hot-air nozzle is touched!
13
.02
Tools, gauges and other accessories
●
1
set of screwdrivers with blade widths from
2
to
10
mm
●
1
set of open-ended wrenches with opening sizes from
7
to
17
mm
●
1
set of allen keys from
1
.
5
to
6
mm
●
1
wire brush
Содержание 8320-010
Страница 105: ...105 95 211 948 95 Part 1 Version 01 04 12 Circuit diagrams 14 02 Circuit diagrams 95 211 948 95...
Страница 106: ...106 Circuit diagrams Version 01 04 12 95 211 948 95 Part 2...
Страница 107: ...107 95 211 948 95 Part 3 Version 01 04 12 Circuit diagrams...
Страница 108: ...108 Circuit diagrams Version 01 04 12 95 211 948 95 Part 4...
