Pfaff 8320-010, Инструкция по эксплуатации

Страница: 52 / 110

52
Heat sealing
10
.04
Programmed heat sealing with individual programs
In the headline, in addition to the program number of the selected program, the number
of zones, the current zone and the comment for the program are displayed. For the current
zone all heat-sealing parameters are displayed. The heat-sealing parameters have been
stipulated during programming and cannot be processed without changing the program.
●
Select the desired program, see Chapter 9 . 02 Selecting the production type .
Description of the functions
Program selection
The function opens the menu for entering the program number or for choosing the
production type, see Chapter 9 . 02 Selecting the production type .
Notepad
This function opens the notepad with program details about the heat-sealing tools
to be used.
Start
(This function appears, when the top feed roller is lowered.)
This function is used to call up the sealing start, analog to pedal function "+ 2 ", also see
Chapter 7.03 Pedal .
Feed roller up/down
This function is use to raise or lower the top feed roller, depending on its position, analog to
the pedal functions "- 1 " and "+ 1 ", also, see Chapter 7.03 Pedal
Feed rollers in reverse
This function can be used to call up the reverse running function of the feed rollers
Break
This function is used to switch off the temperature control of the heating element.
The heating element cools down.
Input menu
This function is used to call up the "Input" mode, see Chapter 11 Input .
Stop
(This function appears during the heat-sealing operation.)
This function is used to stop the heat-sealing operation, analog to pedal function "- 1 ", also
see Chapter 7.03 Pedal
PFAFF 8320-010
Example 1
PFAFF 8320-020
Example 2