33
Preparation
●
Increase or reduce the start delay for the feed rollers directly.
or
●
Call up the fi gure panel to enter the start delay.
Enter the start delay depending on the material being processed.
●
Conclude the input, permissible values will be taken over
The start delay function is used to stipulate the amount of time which should
pass between the engaging of the heating element and the start of the feed
rollers.
●
Enter the value for the speed difference within the permitted range.
The speed difference results from the change in speed of the top feed roller, which ro-
tates either more quickly or more slowly than the bottom feed roller. The value for the
speed difference depends on the material and application.
●
Further sealing parameters
●
Select acceleration and brake profi le of the feed rollers, dependent on the material for
sealing. Each of the profi les selected is displayed as an inverse symbol. A fl at ramp
stands for slight acceleration of the feed rollers. The selection of a steep ramp means
high acceleration.
__
__
Содержание 8320-010
Страница 105: ...105 95 211 948 95 Part 1 Version 01 04 12 Circuit diagrams 14 02 Circuit diagrams 95 211 948 95...
Страница 106: ...106 Circuit diagrams Version 01 04 12 95 211 948 95 Part 2...
Страница 107: ...107 95 211 948 95 Part 3 Version 01 04 12 Circuit diagrams...
Страница 108: ...108 Circuit diagrams Version 01 04 12 95 211 948 95 Part 4...
