English
Wire rope winch >LAMBDA< BGV C1 for stages and studios
04.04.014
technische Änderungen vorbehalten
design changes under reserve
changements techniques sous réserve
8 / 8
The Winch
Do not exceed the capacity of name-plate.
Before taking into operation, a competent person must check:
the lifting device
the load bearing parts of the structure
the carrying medium
mounting
Daily examinations:
brake functions
condition of the rope and
loading device
load bearing parts of the structure.
the load carrying medium
Load attachment device:
check it has sufficient carrying capacity
load hooks must have safety catches
load hooks must be secured to the rope with a solid eye and high
pressure rope clamp and tested acc. to the regulations
fix the load correctly
do not use the winch rope as a hitching device
The winch should be given a thorough examination by a competent person at least once a year.
The entire installation has to be examined by a competent person before taking into operation, when
necessary, after considerable changes and every 4 years.
Always ensure the maintenance intervals are adhered to.
Only use original accessories and spare parts; otherwise, safe function is not guaranteed.
Technical Data
Type
030272015 030272017 030272018 030272019
FEM Group acc. to DIN15020
2 m
2 m
2 m
2 m
Capacity
daN
300
300
300
300
rec. wire rope
DIN EN 12385-4, 15x7K-WSC-1960-B-sZ
rope ø
[mm]
ø6
ø6 ø6
ø6
minimum braking force (rope)
[kN]
33,1
max. rope reception 1 rope
m 1x10 1x14,8 1x19,8 1x24,3
max. rope reception 2 ropes
-
2x6,1
-
-
rope reception for shunting winch
7,5
13,0
18,0
23,0
max.
number
of
layers
1
1
1
1
required crank force
daN
18
18
18
18
crank force – without load
daN
ca. 4
ca. 4
ca. 4
ca. 4
lift per full turn of crank
mm
50
50
50
50
ratio
8,83:1
8,83:1
8,83:1
8,83:1
Brake / securing the load
Double safety spring brake with 2 built-in, independent of
each other operating, brake spring system
weight
kg
~ 30
~ 36
~ 42
~ 47
suitable for ambient temperature
- 20°C
+ 40°C
Functional Description
The wire rope winch for stages and studios is a drum type winch. A single reduction pair of straight cut internal
spur gear drives the winch.
A double safety spring locking device automatically holds the load.
For better rope coiling, the winch is equipped with a spring loaded wire rope pressure drum.
The gear is designed for double nominal load according to BGV C1!
The potential energy (raised load) is converted into heat in the brakes on lowering.
The greater the potential energy (m*g*h) and the shorter the lowering duration, the better will be the
lowering performance. For greater lowering heights, we recommend our electric rope winches or our rope
winches with brake control.
P
Smax.
~
50 W
P
E
=
t
h
g
m
*
*
Mounting Instructions
Mounting:
ATTENTION:
the mounting structure must be designed to
sustain the max. forces imposed by the winch,
(pay attentions to regulations for stages and
studios)
pay careful attention that the mounting surface is flat and true
only fix the winch by means of good quality screws,
tighten the screws evenly
secure the screws
ensure that the crank is free running (crank clearance)
