DIAGNOSTIC TOOL
Page : 6
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
Connection of the diagnostic tool
1.
Turn on the ignition (to unlock the ECU and authorise engine starting)
2.
Remove the diagnostic plug loop (1)
3.
Connect the diagnostic tool to the machine using:
a - Interface cable (2) for EFI system diagnostic
b - Interface cable (2) + special interface (3) ref:
756449 for diagnostic of the ABS/PBS system
4.
Turn on the diagnostic tool.
Note:
Never forget to re-connect the diagnostic plug loop. The loop provides the link between the
immobiliser module and the injection/ignition ECU, and is essential to be able to start the engine
